346519, Rostov region, Shakhty, st. Chaplygin, 54, tel .: 8 (8636) 27-90-26, fax: 8 (8636) 27-90-26, e-mail: [email protected]



Продукция

Continuous cast billet:

Continuously cast square billet with a section of 150x150 mm, length from 6,000 mm to 12,000 mm.

 

Steel carbon of ordinary quality

Low-alloy structural steel

ASTM - 1 / -5% A 29

DIN 17100

GOST 380-2005

ASTM A 615

GOST 19281-89 | || 68

SAE 1008

St37.2

3sp

Grade 40

09G2S

SAE 1015

St44.2

4sp

Grade 60

 

SAE 1023

St52.3

5sp

Grade 75

 

SAE 1030

 

 

 

 

It is possible to manufacture according to other Russian and foreign standards, according to technical requirements agreed with the consumer.

 

Sections:

Rolled sections for reinforcing reinforced concrete structures nominal diameter from 10 mm to 32 mm in bars.

 

ND

Strength class

Nominal diameter, mm

GOST 34028-2016

А500С (profile shape "2f")

10, 12, 14, 16, 18, 20, 22, 25, 28, 32 || | 199

DIN 488:2009-08

В500В (1.0439)

10, 12, 14, 16, 20, 25, 28, 32

 

A500C strength class weldability is guaranteed. Certification test report No. 11c of 12/17/2018, carried out by the Testing Laboratory " StroyLaboratory SL" 2016 profile shape "1f", as well as strength classes A400 and A600.

Существует возможность производства проката согласно требований ГОСТ 34028-2016 формой профиля «1ф», а также классов прочности А400 и А600.

 

Type of periodic profile of shape "2f" according to GOST 34028-2016

Geometric parameters according to GOST 34028-2016

Parameter

Designation

№10

№12

№14 || | 254

№16

№18

№20

№22

№25

№28

№32

Running meter weight *, kg

Nominal

0.616

0.888 || | 300

1,208

1.578

1.998

2.466

2.984

3.853

4,834

6,313

ОМ1

± 6%

± 6%

± 5%

± 5%

± 5%

± 5%

± 4%

± 4%

± 4%

± 4%

ОМ2

- 1 / -6%

- 1 / -6%

- 1 / -5%

- 1 / -5%

- 1 / -5%

-1/-5%

- 1 / -4.5%

- 1 / -4.5%

- 1 / -4.5%

- 1 / -4.5%

Actual bar diameter along the bar, mm

d

9 , 0-9.8

10.8-11.6

12.8-13.6

14.7-15.5 || | 450

16,6-17,4

18.6-19.4

20.6-21.5

23.6 -24.5

26.3-27.4

30.0-31.1

Ovality **, mm

ОВ1

Not more than 1.2

Not more than 1.2

Not more than 1.2

Not more than 1.6

Not more than 1.6

Not more than 1.6

Not more than 1.6

Not more than 1.6 || | 516

Не более 2,4

Not more than 2.4

ОВ2

Not more than 2.5

Not more than 2.5

Not more than 2.5

Not more than 3.0

Not more than 3.0

Not more than 3 , 0

Not more than 3.0

Not more than 3.0

Not more than 4.2

Not more than 4.2

Height of transverse ribs, mm

h

Not less than 0.70

Not less than 0.78

Not less than 0.91

Not less than 1.04

Not less than 1.17

Not less than 1.30

Not less than 1.43

Not less than 1, 50

Not less than 1.68

Not less than 1.92

Step of transverse ribs, mm

t

5,5-10,0

6.0-12.0

7.0-14.0

8.0-16, 0

9.0-18.0

10.0-20.0

11.0-22.0

11.3-25.0

12.6-28.0

14.4-32.0

Total distance between the ends of the transverse ribs, mm

Ʃе i

Not more than 7.9

Not more than 9.4

Not more than 11 , 0

Not more than 12.6

Not more than 14.1

Not more than 15.7

Not more than 17.3

Not more than 19.6

Not more than 22.0

Not more than 25.1

Relative area of ​​crushing of transverse ribs, mm

Fr

Not less than 0.052

Not less than 0.056

Not less than 0.056

Not less than 0.056 || | 747

Не менее 0,056

Not less than 0.056

Not less than 0.056

Not less than 0.05 6

Not less than 0.056

Not less than 0.056

The angle of inclination of the lateral surface of the rib, о

α

Not less than 45

Not less than 45

Not less than 45

Not less than 45

Not less than 45

Not less than 45

Not less than 45

Not less than 45

Not less than 45

Not less than 45

Angle of inclination of transverse ribs, о

β

35-75

35-75 || | 841

35-75

35-75

35-75

35-75

35-75 || | 861

35-75

35-75

35-75


* The group of maximum deviations for the mass of 1 meter of rolled length is set by the customer in the order. If a group of maximum deviations is not specified in the order, then the production of rolled products shall be carried out according to the ОМ1 group.
** The ovality accuracy (ОВ1 or ОВ2) is set by the customer in the order. If the ovality accuracy is not specified in the order, then the production of rolled products is carried out according to the OB2 accuracy.

Type of periodic profile according to DIN 488: 2009-08

 

Geometric parameters according to DIN 488: 2009-08

Parameter

No. 10

No. 12

No. 14

No. 16

№20

№25

№28

№32

Running meter weight, kg | || 932

0,617

+ 6 / -4%

0.888

+ 6 / -4%

1, 21

+ 6 / -4%

1.58

+ 6 / -4%

2.47

+ 6 / -4%

3.85

+ 6 / -4%

4.83

+ 6 / -4%

6.31

+ 6 / -4%

Height of transverse ribs, mm

in the middle

a m

Not less than 0.65

Not less than 0.78

Not less than 0 , 91

Not less than 1.04

Not less than 1.30

Not less than 1.63

Not less than 1.82

Not less than 2.08

at a distance of ¼ and ¾

a 1/4,

a 3/4

Not less than 0.45

Not less than 0, 54

Not less than 0.63

Not less than 0.72

Not less than 0.90

Not less than 1.13 | || 1062

Не менее 1,26

Not less than 1.44

Distance between transverse ribs, c, mm

5.5-7 , 4

6.1-8.3

7.1-9.6

8.1-11.0

10,2-13,8

12.8-17.2

14.3-19.3

16.3-22.1

Projection area f R

Not less than 0.052

Not less than 0.056

Не менее 0,056

Not less than 0.056

Not less than 0.056

Not less than 0.056

Not less than 0.056

Not less than 0.056

Angle of inclination of the lateral surface of the rib, α, о

At least 40

At least 40

At least 40

At least 40

At least 40

Not less than 40

Not less than 40

Not less than 40

Angle of inclination of transverse ribs, β,о

40-70

40-70

40-70

40-70

40 -70

40-70

40-70

40-70

Reinforcing bars of steel grade В500В are certified according to the requirements of the German DIN standard 488: 2009-08 by the German Testing Institute for Materials Research in Construction MFPA Leipzig GmbH.

Products

The finished product is continuous cast billets of square section and rolling of periodic profiles for reinforcing reinforced concrete structures.

more details

Quality

Equipment of the plant meets the most advanced concepts the development of modern metallurgy. The equipment allows you to obtain high-quality cast billets that meet the requirements of foreign and domestic consumers.

A quality management system has been introduced and applied in accordance with the requirements of ISO 9001: 2015.

 

more details

Production

REMZ is equipped with modern technological equipment from the world's leading manufacturers:

Electric arc furnace 90t. firm CONCAST; Installation of ladle furnace of the TAGLIAFERRI company (TEKINT); Continuous casting machine of the CONCAST company; Air product separation workshop of the SIAD company.

Wire rod mill by Sidermontaggi SpA, Danieli (Italy).

подробнее